Rptd: Challenger 2 TES & 2F Turret Texture Issue & Track Misalignment

[Zer0_Tru7h 1,207]

My game version: 2.13.0.82

 

Platform PC

 

Affected vehicles Challenger 2 TES and Challenger 2 (2F) Visual Model

 

When the thermal blanket texture on the back of the turret is turned away from the sun the back and back under side of the turret turns totally black.

 

https://imgur.com/MN7ixrQ

 

The texture acts normally while in direct sunlight.

 

https://imgur.com/S7ewBvd

 

The lighting of the texture seems to be broken when ever it is in shadow.

 

Also Challenger 2 TES has its tracks misaligned.

 

https://imgur.com/a/8Vekcva

 

They are clipping through the mud flaps and are off centre with the wheels.

2022_02_01_14_50_55__8588.clog DxDiag.txt

[KnightoftheAbyss 3,387]

Quote

To ensure that we are able to help you as quickly as possible, please be reminded that we can only help you properly when the submitted files and information are complete.
Also, be aware that you should only describe one issue per thread. If you experience multiple issues, please open a new thread for each separately, even when the issues appear to be similar.

 

Only one issue per thread please, as per the guidelines.  They are in the Pinned topics at the beginning of the thread.

Please follow the guidelines and template and include all the information asked for.  ie: the replay's.

 

I will check the mudflaps.

 

Your GPU driver is not the current one.

 

Can you please remove the current graphics driver(s) using DDU (or similar). https://www.wagnardsoft.com/

Please ensure that you follow the instructions and use Safe Mode.

Then re-install/install the latest driver(s) and re-test.

 

Thanks

[KnightoftheAbyss 3,387]

I could not replicate this.

 

Your GPU driver is out of date.  Please update it and test again.  It maybe a monitor setting or graphics setting as well.

To some extent it will be in shadow obviously.

[Zer0_Tru7h 1,207]

Thank you for the reply.

 

You have replicated the problem in those screenshots, the back of the turret is pitch black losing all texture in comparison to underneath the turret which is shadowed normally. 

 

 

I have drawn over it to make it more obvious what I'm on about. Its a problem with the thermal blanket texture over the top of the normal tank. You can see those lighter rectangular parts on the back are where the normal turret is exposed and not covered by the blanket. The shading issue also extends slightly under the back of the turret.

 

 

I will attach a new file with an updated driver however the problem still persists.

 

DxDiag.txt

[KnightoftheAbyss 3,387]

As I indicated.  I could change this to some extent by adjusting the Brightness and Contrast settings on my monitor.

 

I have reported it, but I believe that there can be substantial change by playing with the settings on your monitor.